How To: Change VTEC Solenoid Gasket
2 posters
Page 1 of 1
How To: Change VTEC Solenoid Gasket
I know, I know, this is a very simple DIYer project but atleast I got details picture for those new people who want to know what to do..Think of this as my very, very, very small contribution no necarclub...anyway, here goes.
*Disclaimer: Do this at your own risk. I'm not responsible if you mess up your car in anyway or form while performing this task.
Many of us have a similar oil leak problem..Most fixed the problem by replacing: Distributor O-ring, valve cover gasket, and vtec solenoid gasket..this is a step by step for the vtec solenoid gasket..
Car done on: 97 GS-R with 97k ish miles
1. DISCONNECT the Neg. battery terminal..it's good practice when dealing with electrical..
2. Tools u'll need
2b. get the correct part..look at the picture
3. PLACE a Rag or towel under the solenoid to catch some oil that will leak out.
Now remove 3 10mm socket screws.
4. the solenoid look like this
5. old and new gasket
6. Clean it out
6b. cap p/n if u want it
7. Put everything back
DONE!! simple..actually VERY SIMPLE..!!
thanks for looking..
*Disclaimer: Do this at your own risk. I'm not responsible if you mess up your car in anyway or form while performing this task.
Many of us have a similar oil leak problem..Most fixed the problem by replacing: Distributor O-ring, valve cover gasket, and vtec solenoid gasket..this is a step by step for the vtec solenoid gasket..
Car done on: 97 GS-R with 97k ish miles
1. DISCONNECT the Neg. battery terminal..it's good practice when dealing with electrical..
2. Tools u'll need
2b. get the correct part..look at the picture
3. PLACE a Rag or towel under the solenoid to catch some oil that will leak out.
Now remove 3 10mm socket screws.
4. the solenoid look like this
5. old and new gasket
6. Clean it out
6b. cap p/n if u want it
7. Put everything back
DONE!! simple..actually VERY SIMPLE..!!
thanks for looking..
GSR402Lx- Number of posts : 21
Registration date : 2008-01-15
Re: How To: Change VTEC Solenoid Gasket
Kries,
are there any rules for posting dinky diy guide?? cause i don't want to whore up the space with my dinky guide..i'm sure i'll have more in the future when summer comes..some people might think it's silly to have a super simple diy guide when everyone can do it without looking at pictures and whatnot..
are there any rules for posting dinky diy guide?? cause i don't want to whore up the space with my dinky guide..i'm sure i'll have more in the future when summer comes..some people might think it's silly to have a super simple diy guide when everyone can do it without looking at pictures and whatnot..
GSR402Lx- Number of posts : 21
Registration date : 2008-01-15
Similar topics
» LS/Vtec, B20/Vtec Build Info.
» name change
» New A-Vtec
» MPFI and Vtec wiring
» FS APEXi V-AFC 2 VTEC Control
» name change
» New A-Vtec
» MPFI and Vtec wiring
» FS APEXi V-AFC 2 VTEC Control
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|