The build of the Midori Hatch.. 56k Take A Hike!!!
+3
Eric
BOWERS
J Rod
7 posters
Page 1 of 1
The build of the Midori Hatch.. 56k Take A Hike!!!
So I put myself on a budget, a time frame, and set amount of money for JUST mugen parts hahahhahaha.
Well, Here is where it starts. Parts are on the way, and no going back now.
96 hatch Midori Green hatch from Kia of Lincoln for a STEAL of a price. Stock condition, body is fairly good, but could use a bit of work. Pretty much wanted to get something to run the 2008 auto-x season in. Stay tuned because Jason from the shop has some goodies for it, ALOT of goodies and I will be updating the thread at least a couple times a week as long as parts keep showing up.
Mod list will be up once the motor is in and I am at a temporary stopping point, until then, will be under wraps except for the people that know the truth bout whats going in.
Mod List:
Engine:
Built Motor
11:5:1 CR Pistons - Bored to 82mm
Eagle H Beam Rods
Polished Shot Peened LS Crank
ARP Rod Bolts
ARP Headstuds
ARP Main's
Moroso Oil Pan
Cometic Headgasket
Blox Stage 2 Cams
Blox Valvesprings
Blox Retainers
Head port work done by KG
Ported OEM Intake Manifold
63MM Throttle Body
Password JDM Whale Penis (Until the Mugen Air Silencer Gets Here)
P-Fab Header
Custom True 2.5" Midpipe
Mugen Twin Loop Axle Back
2mm Oversized SS Valves
Custom 2.5" Test Pipe
OBD1 Wiring Conversion
P28 Chipped and Tuned with Neptune
Integra Type R Dual Bend Shifter
OEM Breather setup replaced with Custom Catch Can off Firewall
-6AN Stainless Fuel Line - Filter to Rail
AEM Fuel Rail (Ordered)
Two -8AN lines off the front of the valvecover to custom Triangle Catch Can made by The Shops Chassis Welder
Powder Coated Valvecover to Match the car (Waiting on fittings to be welded)
Powdercoated Intake Mani (Waitin on it)
Skunk2 Cam Gears
Hasport motor Mounts
Comp Clutch
Comp Chromoly 8lb Flywheel
GSR Tranny
Quaife center Differential
Gator Stage 2 Axles
Suspension/Wheels/Brakes:
Omnipower Street Coilovers
Omnipower Rear LCA's
Omnipower Front UCA Camber Kit
Omnipower Rear Camber Kit
Prothane Bushings
Integra Front Brakes and Spindles
Civic Si Rear Brakes and Spindles
Brembo Blanks (Coming)
Hawk Pads (Coming)
Stainless Brake Lines F/R
Password JDM Front and Rear Strut Tower Bars
Autopower 4 PT Cage with Camera Mount and Harness Mounts
Mugen M7 Wheels - Polished lip with Gold Face (Street Wheels)
5Zigen FNO1RC +33 Offset, 15X7. (R Comp Wheel)
Azenis on the M7's - 205/50/15
V710 R Comps on FNO1RC's - 205/50/15
Exterior:
VIS CF Front Lip
VIS CF Hood
VIS CF Duckbill
Body work and Repainted with fresh Midori (Waiting on room in his shop)
JDM Thin Moldings
SIR F/R Bumbers from PasswordJDM
Urethane CTR Replica Rear Lip
Painted Mirrors, and Skirts
CF Grill
New Windshield (I hate scratches)
Interior:
Recaro SRD Seats - Black with Red Stitch
CTR Rear Seats
CTR FloorMats
Civic Si Cluster
Simpson 4 Pt Racing Harness
Here is a quick picture of it at The Shop. Just put the wheels on that I got from ScionScotty, waiting on the azenis to get here so they go on..
Alright, just another teaser of whats to come... This is a fraction of the carbon thats in store.. This is what is here already.
Motor will be in once the hasports, clutch, flywheel, and Quaife get here. Motor was picked up the other day and will be cleaned extensively. Wont look like that when it goes into the car. Just paid for the breather setup on it. 2 -10 AN fittings off the front of a valvecover to a custom catchcan that the Chassis guy came and measured for yesterday. Once I get the valvecover fittings on, I will be taking the valvecover up to Trail Performance Coatings to get powdercoated as well as MANY other items from the engine bay, and header to get ceramic coated.
Ill keep it updated as much as I can.
Well, Here is where it starts. Parts are on the way, and no going back now.
96 hatch Midori Green hatch from Kia of Lincoln for a STEAL of a price. Stock condition, body is fairly good, but could use a bit of work. Pretty much wanted to get something to run the 2008 auto-x season in. Stay tuned because Jason from the shop has some goodies for it, ALOT of goodies and I will be updating the thread at least a couple times a week as long as parts keep showing up.
Mod list will be up once the motor is in and I am at a temporary stopping point, until then, will be under wraps except for the people that know the truth bout whats going in.
Mod List:
Engine:
Built Motor
11:5:1 CR Pistons - Bored to 82mm
Eagle H Beam Rods
Polished Shot Peened LS Crank
ARP Rod Bolts
ARP Headstuds
ARP Main's
Moroso Oil Pan
Cometic Headgasket
Blox Stage 2 Cams
Blox Valvesprings
Blox Retainers
Head port work done by KG
Ported OEM Intake Manifold
63MM Throttle Body
Password JDM Whale Penis (Until the Mugen Air Silencer Gets Here)
P-Fab Header
Custom True 2.5" Midpipe
Mugen Twin Loop Axle Back
2mm Oversized SS Valves
Custom 2.5" Test Pipe
OBD1 Wiring Conversion
P28 Chipped and Tuned with Neptune
Integra Type R Dual Bend Shifter
OEM Breather setup replaced with Custom Catch Can off Firewall
-6AN Stainless Fuel Line - Filter to Rail
AEM Fuel Rail (Ordered)
Two -8AN lines off the front of the valvecover to custom Triangle Catch Can made by The Shops Chassis Welder
Powder Coated Valvecover to Match the car (Waiting on fittings to be welded)
Powdercoated Intake Mani (Waitin on it)
Skunk2 Cam Gears
Hasport motor Mounts
Comp Clutch
Comp Chromoly 8lb Flywheel
GSR Tranny
Quaife center Differential
Gator Stage 2 Axles
Suspension/Wheels/Brakes:
Omnipower Street Coilovers
Omnipower Rear LCA's
Omnipower Front UCA Camber Kit
Omnipower Rear Camber Kit
Prothane Bushings
Integra Front Brakes and Spindles
Civic Si Rear Brakes and Spindles
Brembo Blanks (Coming)
Hawk Pads (Coming)
Stainless Brake Lines F/R
Password JDM Front and Rear Strut Tower Bars
Autopower 4 PT Cage with Camera Mount and Harness Mounts
Mugen M7 Wheels - Polished lip with Gold Face (Street Wheels)
5Zigen FNO1RC +33 Offset, 15X7. (R Comp Wheel)
Azenis on the M7's - 205/50/15
V710 R Comps on FNO1RC's - 205/50/15
Exterior:
VIS CF Front Lip
VIS CF Hood
VIS CF Duckbill
Body work and Repainted with fresh Midori (Waiting on room in his shop)
JDM Thin Moldings
SIR F/R Bumbers from PasswordJDM
Urethane CTR Replica Rear Lip
Painted Mirrors, and Skirts
CF Grill
New Windshield (I hate scratches)
Interior:
Recaro SRD Seats - Black with Red Stitch
CTR Rear Seats
CTR FloorMats
Civic Si Cluster
Simpson 4 Pt Racing Harness
Here is a quick picture of it at The Shop. Just put the wheels on that I got from ScionScotty, waiting on the azenis to get here so they go on..
Alright, just another teaser of whats to come... This is a fraction of the carbon thats in store.. This is what is here already.
Motor will be in once the hasports, clutch, flywheel, and Quaife get here. Motor was picked up the other day and will be cleaned extensively. Wont look like that when it goes into the car. Just paid for the breather setup on it. 2 -10 AN fittings off the front of a valvecover to a custom catchcan that the Chassis guy came and measured for yesterday. Once I get the valvecover fittings on, I will be taking the valvecover up to Trail Performance Coatings to get powdercoated as well as MANY other items from the engine bay, and header to get ceramic coated.
Ill keep it updated as much as I can.
Re: The build of the Midori Hatch.. 56k Take A Hike!!!
Nice...I thought you weren't going to release any details of the engine build yet...
Re: The build of the Midori Hatch.. 56k Take A Hike!!!
BOWERS wrote:Nice...I thought you weren't going to release any details of the engine build yet...
Got out in KC..
Re: The build of the Midori Hatch.. 56k Take A Hike!!!
looks good, freash paint should be killer.
Eric- Moder-Hater
- Number of posts : 96
Age : 35
Location : Cincinnati, OH
Registration date : 2008-01-12
Re: The build of the Midori Hatch.. 56k Take A Hike!!!
A big plus. That will be spring time though. After salt and shit is off the roads.
Re: The build of the Midori Hatch.. 56k Take A Hike!!!
Hey, Jrod how much did something like this run ya? Do you think if I gave him my hatch and a list of things I wanted then said I would give money to them every week or every other week tell its paid for they would go for it? I was thinking about trying something like that with a shop or whatever just because I can't get a loan for the whole amount and Im not a very good saver. Just wondering I might be interested in doing something like that if they would.
vicride345- Number of posts : 7
Age : 38
Location : Omaha, NE
Registration date : 2008-01-14
Re: The build of the Midori Hatch.. 56k Take A Hike!!!
To be totally honest, no idea.
till got alot of wok to do. Waiting on a bunch of stuff, still. Lots of powdercoating, ceramic coat the header.. it goes on. Danm. Test fit of the header.
Slicks I got for a $150. They have nothing more than one burnout in the box on them from what I was told. I think thats a steal for slicks and wheels!
till got alot of wok to do. Waiting on a bunch of stuff, still. Lots of powdercoating, ceramic coat the header.. it goes on. Danm. Test fit of the header.
Slicks I got for a $150. They have nothing more than one burnout in the box on them from what I was told. I think thats a steal for slicks and wheels!
Re: The build of the Midori Hatch.. 56k Take A Hike!!!
DAMN IT!!!! Safety Cone Orange is the color i was gonna use for my autox and drag rims....... errrr now i need a new color
Uncle Buck- Moder-Hater
- Number of posts : 115
Age : 39
Location : Whitewood, South Dakota
Registration date : 2008-01-11
Re: The build of the Midori Hatch.. 56k Take A Hike!!!
hahhaha.
Go to Autozone, high temp paint...
"Grabber Green"
Go to Autozone, high temp paint...
"Grabber Green"
Re: The build of the Midori Hatch.. 56k Take A Hike!!!
wanna know why i wont go grabber green??? here is a teaser pic of my roomates drag teg....lol
Uncle Buck- Moder-Hater
- Number of posts : 115
Age : 39
Location : Whitewood, South Dakota
Registration date : 2008-01-11
Re: The build of the Midori Hatch.. 56k Take A Hike!!!
Oh dear god. That looks like its straight out of F&F.
So... PINK!
So... PINK!
Re: The build of the Midori Hatch.. 56k Take A Hike!!!
well the guy isnt all there sometimes lol.... Eightsixxx knows what i mean
he goes with the bright green cus its much easier to see oil leaks, this car takes a BEATING!!!!
but iam thinking either: Pink, Purple, or Yellow
he goes with the bright green cus its much easier to see oil leaks, this car takes a BEATING!!!!
but iam thinking either: Pink, Purple, or Yellow
Uncle Buck- Moder-Hater
- Number of posts : 115
Age : 39
Location : Whitewood, South Dakota
Registration date : 2008-01-11
Re: The build of the Midori Hatch.. 56k Take A Hike!!!
Purple would be sweet too.
Lavender, Brown, Or one of those mystic color paints that changes colors. lol.
Lavender, Brown, Or one of those mystic color paints that changes colors. lol.
Re: The build of the Midori Hatch.. 56k Take A Hike!!!
k the guys and i have all picked out the rims colors for our cars.....
UB-89 prelude-pink (unanimous vote)
Dusin-97 integra-green (as shown motor on previous page)
Don-86 civic- orange
Matt-93 civic hatch-yellow
Josh (Eightsixxx)-civic or crx not sure yet (but color is still up in the air)
Dave-98 integra- purple
so ya its decided that we are gonna be the color-ful group
UB-89 prelude-pink (unanimous vote)
Dusin-97 integra-green (as shown motor on previous page)
Don-86 civic- orange
Matt-93 civic hatch-yellow
Josh (Eightsixxx)-civic or crx not sure yet (but color is still up in the air)
Dave-98 integra- purple
so ya its decided that we are gonna be the color-ful group
Uncle Buck- Moder-Hater
- Number of posts : 115
Age : 39
Location : Whitewood, South Dakota
Registration date : 2008-01-11
Re: The build of the Midori Hatch.. 56k Take A Hike!!!
how about this color blue for the the civic and crx...i need to find wheels first tho
MugenWhore- Number of posts : 41
Age : 34
Registration date : 2008-01-14
Re: The build of the Midori Hatch.. 56k Take A Hike!!!
Well, I had one halfway decent warm day so I decided to put a couple things on.
Similar topics
» WTB: CRX or Civic Hatch.
» Chi-Shot 92 CX Hatch
» k20 Hatch walks all over an Evo!
» H22 EF9 Build
» N/A build advice..little bit about everything
» Chi-Shot 92 CX Hatch
» k20 Hatch walks all over an Evo!
» H22 EF9 Build
» N/A build advice..little bit about everything
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|