Eric's 91 integra
+2
BOWERS
Eric
6 posters
Page 1 of 1
Eric's 91 integra
this is my integra, I bought it a couple months ago for $800, since then ive painted the valve cover cast iron gray and put rota group n's on it. soon it will be sitting low.
Eric- Moder-Hater
- Number of posts : 96
Age : 35
Location : Cincinnati, OH
Registration date : 2008-01-12
Re: Eric's 91 integra
thanks, heres a couple more from that spot (my uncles house)
the white civic is my brothes.
the white civic is my brothes.
Eric- Moder-Hater
- Number of posts : 96
Age : 35
Location : Cincinnati, OH
Registration date : 2008-01-12
Re: Eric's 91 integra
good looking DA
1996hondacivic- Number of posts : 20
Registration date : 2008-01-13
Re: Eric's 91 integra
thanks, putting coil overs on next week
Eric- Moder-Hater
- Number of posts : 96
Age : 35
Location : Cincinnati, OH
Registration date : 2008-01-12
Eric- Moder-Hater
- Number of posts : 96
Age : 35
Location : Cincinnati, OH
Registration date : 2008-01-12
Re: Eric's 91 integra
modified the stock intake tube last night...
Eric- Moder-Hater
- Number of posts : 96
Age : 35
Location : Cincinnati, OH
Registration date : 2008-01-12
Re: Eric's 91 integra
those aren't mugen rnr's are they
are they the rota replica?
are they the rota replica?
MugenWhore- Number of posts : 41
Age : 34
Registration date : 2008-01-14
Re: Eric's 91 integra
yeah their the rota's. they work just as good as the mugens, just cheaper.
Eric- Moder-Hater
- Number of posts : 96
Age : 35
Location : Cincinnati, OH
Registration date : 2008-01-12
Re: Eric's 91 integra
Eric wrote:yeah their the rota's. they work just as good as the mugens, just cheaper.
id rather buy the mugens i love my mugens...for the fact every one says they're ugly and im the only one that has them...
they're mugen cf-48's
MugenWhore- Number of posts : 41
Age : 34
Registration date : 2008-01-14
Re: Eric's 91 integra
Nice teg!
B17GSR- Number of posts : 2
Location : Wayne NE
Registration date : 2008-01-14
Re: Eric's 91 integra
the good: car runs really good. i raced a mustang last week and won by about a car, my motor is all stock too.
seats are really clean and comfortable
the bad:
stuff that needs replaced - seat belts, all door panels, dash (dog messed it all up)
no hatch carpet
driver side door
needs both fenders
front bumper
hood would be nice
hole in rear bumper
spoiler has millions of cracks
windshiled has crack
and its starting to rust
since the body and interior are the worst of it all, im on the lookout for a clean CRX shell with good interior to start the real deal project.
im pretty sure everything swaps over from the 91 teg to the CRX. does anyone know for sure?
seats are really clean and comfortable
the bad:
stuff that needs replaced - seat belts, all door panels, dash (dog messed it all up)
no hatch carpet
driver side door
needs both fenders
front bumper
hood would be nice
hole in rear bumper
spoiler has millions of cracks
windshiled has crack
and its starting to rust
since the body and interior are the worst of it all, im on the lookout for a clean CRX shell with good interior to start the real deal project.
im pretty sure everything swaps over from the 91 teg to the CRX. does anyone know for sure?
Eric- Moder-Hater
- Number of posts : 96
Age : 35
Location : Cincinnati, OH
Registration date : 2008-01-12
Re: Eric's 91 integra
prolly not, my brothers CRX and my teg are not very similar interior wise...
I have an extra hood if you are looking for one, also have some fenders.
let me know
I have an extra hood if you are looking for one, also have some fenders.
let me know
B17GSR- Number of posts : 2
Location : Wayne NE
Registration date : 2008-01-14
Re: Eric's 91 integra
not talking interior, im talking like suspension, brakes, engine...seats too. but just the seats
Eric- Moder-Hater
- Number of posts : 96
Age : 35
Location : Cincinnati, OH
Registration date : 2008-01-12
Re: Eric's 91 integra
some updates on the teg...
Installed:
ACT Heavy Duty Pressure Plate
ACT Prolite 8.8lb flywheel
ACT Modified Street Disc
El cheapo front coil overs
SPW Front Strut bar
Ebay rear strut bar
spoilerless hatch
Removed:
rusted hatch/spoiler
ALL interior
Need to install:
Fidanza Short shifter
ebay front and rear tie bars
Password JDM Whale Penis intake tube
hood
fenders
bumpers
(replacing with used parts in better condition)
hopefully by summer ill be painting it Pearl White
Installed:
ACT Heavy Duty Pressure Plate
ACT Prolite 8.8lb flywheel
ACT Modified Street Disc
El cheapo front coil overs
SPW Front Strut bar
Ebay rear strut bar
spoilerless hatch
Removed:
rusted hatch/spoiler
ALL interior
Need to install:
Fidanza Short shifter
ebay front and rear tie bars
Password JDM Whale Penis intake tube
hood
fenders
bumpers
(replacing with used parts in better condition)
hopefully by summer ill be painting it Pearl White
Eric- Moder-Hater
- Number of posts : 96
Age : 35
Location : Cincinnati, OH
Registration date : 2008-01-12
Re: Eric's 91 integra
and heres how it should look after painted..
color matched side/bumper moldings and mirrors
color matched side/bumper moldings and mirrors
Eric- Moder-Hater
- Number of posts : 96
Age : 35
Location : Cincinnati, OH
Registration date : 2008-01-12
Similar topics
» FS: 91 Integra $1300
» Gen 2 Integra Pics
» CRX with integra parts
» FS: 91 Integra Corner Light OEM
» FS: tokico blues for 90-93 integra
» Gen 2 Integra Pics
» CRX with integra parts
» FS: 91 Integra Corner Light OEM
» FS: tokico blues for 90-93 integra
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|